Led Indication, Outside Line - Panasonic KX-TD308 Installation Manual

Features
3
L
ED
Indication, Outside Line
Description
Flashing light patterns
Slow flashing
Moderate flashing
Rapid flashing
Conditions
Programming References
The LED (Light Emitting Diode) indicators of the buttons
associated with outside lines show the line conditions with a variety
of lighting patterns. This allows the user to see which lines are idle
and which lines are in use. The table below shows the lighting
pattern for different line conditions.
LED Indicator
Off
Green On
Green slow flashing
Green moderate
flashing
Green rapid flashing
Red On
Red slow flashing
i
Red slow flashing indication appears on the S-CO button only.
l
The indication of Privacy Release appears on the S-CO button only.
l
Section 4, System Programming
Station Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U ser Manual
Flexible CO Button Assignment - Loop-CO (L-CO) Button,
Outside Line Status
Idle
I-use
I-hold
I-Exclusive Hold / Outside-to-outside
line call / Unattended Conference
Hold Recall / Privacy Release possible /
Incoming call
Other-use / Log-Out
Other-hold
i
I
I
i
Single-CO (S-CO) Button
Features
L
3-91