Call Duration Count Start Time - Panasonic KX-TD308 Installation Manual

2 1 2
Description
Selection
Default
Programming
Conditions
Feature References
System Programming
4 4 a

Call Duration Count Start Time

Sets the number of seconds the system waits between the end of
dialing and the start of the SMDR timer for outgoing toll calls.
When the system has sent out all the digits to the central office and
this timer expires, the system starts counting the call. A display
telephone shows the elapsed time of the call. The starting time and
the duration of a call are recorded in the SMDR record.
Time (seconds): 0 through 60
1. Enter 212.
Display: 212 CALL TIMER
2. Press NEXT.
Display example: Time: 0 set
3. Enter the time.
change the current entry, press
To
4.
Press STORE.
Press END.
5.
The timer starts counting
l
not apply to incoming calls. The timer for incoming calls starts
immediately.
You cannot leave the entry empty.
l
Section 3, Features
Display, Call Information
Station Message Detail Recording (SMDR)
Timer Programming
and
CLEAR
after all the digits are dialed. This timer does
enter the new time.