Automatic Hold By Co / Dss Button - Panasonic KX-TD308 Installation Manual

System Programming
4 3
l

Automatic Hold by CO / DSS Button

Description
Selection
Default
Programming
Enables or disables automatically holding an outside call when a
DSS button or a CO button on a proprietary telephone is pressed.
Through this assignment, each button acts as follows:
transfers it to an extension without pressing the TRANSFER
button.
Button: DSS or CO
l
Enable / Disable
l
DSS button - Enable, CO button - Disable
1.
Enter 108.
Display: 108 AUTO HOLD
2. NEXT
Press to program the DSS button.
Display example: DSS XFER:Enable
SELECT
3.
Keep pressing
displayed.
4. NEXT
Press to program the CO button.
Display example: CO Hold :Disable
SELECT
5.
Keep pressing
displayed.
STORE.
6.
Press
7. Press END.
This assignment applies to all DSS and CO buttons on all proprietary
l
telephones in the system.
Section 3, Features
Automatic Hold by CO Button
One-Touch Transfer by DSS Button
until the desired selection is
until the desired selection is
System Programming
1 0 8
4-41