Timer Programming
4 4 a
Description
Selection
Default
Programming
Conditions
First Digit Time
Sets the maximum time allowed between the start of an outside dial
tone and the first digit dialed on an outgoing outside call. If an
extension user fails to dial any digits during this time, the DTMF
receiver is released.
Time (seconds): 5 through 120
10 s
1.
Enter 207.
Display: 207 1ST DIGIT T
2.
Press NEXT.
Display example: Time: 10 set
Enter the time.
3.
To change the current entry, press CLEAR
4.
Press STORE.
Press END.
5.
This timer
is used for toll restriction checking.
l
You cannot leave the entry empty.
l
Section 3, Features
Toll Restriction
2 0 7
and
enter the new time.
System Programming
4-67