Intercept Extension - Day /Night
Description
Selection
Default
Programming
Conditions
Feature References
4-102
System Programming
Intercept Routing provides an automatic redirection of calls which
cannot or have not been answered. These programs set the
destination in both day and night modes for each outside line.
Outside line (CO) number: 1 through 3, * ( x =aIl outside lines)
l
Extension number: 2 through 4 digits / Disable (no Intercept
l
Routing)
1.
Enter a program address (409 for day or 410 for night).
Display example: 409 INTERCEP DAY
2.
Press NEXT.
Display: CO Line NO?+
Enter the outside line number.
3.
To enter outside line number 1, you can also press NEXT.
Display example: CO1:Disable
4.
Enter an extension number.
To change the current entry, press CLEAR and enter the new number.
To disable Intercept Routing, press CLEAR.
Press STORE.
6.
To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
You set the extension numbers in program [003] "Extension Number
l
Set" or floating numbers of pager and DISA message in program [8 131
"Floating Number Assignment".
To assign all outside lines to one selection, press the * key in step 3.
l
In this case, the display shows the contents programmed for outside line
1.
Program [401] 'Outside Line Group Assignment" is used to assign each
l
outside line to an outside line group.
Section 3, Features
Intercept Routing