Panasonic KX-TD308 Installation Manual page 355

601
Description
Selection
Default
Programming
Conditions
Feature References
System Programming
4-120
Extension Programming
4 8
l
Programs each extension for Class of Service (COS). The COS
determines the call handling abilities of each extension.
1 through 8, * (-1 / -2),
Jack number:
l
1 through 8
COS number:
l
All jacks-l/2 - COS 1
1. 601.
Enter
Display: 601 COS #
2. Press NEXT.
Display: Jack NO?+
3. jack number.
Enter a
To enter jack number 1, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack number.
Display example: #l-1:COSl
4. number.
Enter a COS
To change the current entry, enter the new number.
Press STORE.
To program anotber jack, press
SELECT
and the desired
7.
Repeat steps 4 through 6.
8. Press END.
. There is a maximum of eight Classes of Service. Every extension
must be assigned to a Class of Service and is subject to the COS
Programming of programs [500] through [508] and [991].
For an explanation of jack numbering, see "Rotation of jack number"
l
on page 4-7.
To assign all jacks to one COS, press the * key in step 3. In this
l
case, the display shows the contents programmed for Jack 1.
Section 3, Features
Class of Service (COS)
NEXT PREV,
or
jack number.
or
.