Call Transfer To Outside Line - Panasonic KX-TD308 Installation Manual

4 7 COS Programming
l
Description
S e l e c t i o n
Default
Programming
Conditions
Feature References

Call Transfer to Outside Line

This program determines which Classes of Services (COS) are
allowed to perform the Call Transfer to Outside Line function.
COS number: 1 through 8, 3c ( % =all COS)
l
Enable / Disable
l
All COS - Disable
1. Enter 503.
Display: 503 CALL XFER CO
2. Press NEXT.
Display: COS NO?+
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
Repeat steps 4 through 6.
8. Press END.
To assign all COS to one selection, press the * key in step 3. In this
l
case, the display shows the contents programmed for COS 1.
Program [601] "Class of Service" is used to assign a Class of Service to
l
each extension.
Section 3, Features
Call Transfer, Screened - to Outside Line
System Programming
4-l 13