Figure 003-23 Mounting The Pim To The Rack Parts - NEC NEAX 2000 IVS Installation Manual

NAP 200-003
Sheet 27/37
Installation of Main Equipment
(3) Attach four M4 machine screws (provided) to the RACK PARTS as shown in
For proper mounting of each PIM, approximately 4 mm (0.2 inch) spacing should be provided between the
inner face of the M4 machine screw and the RACK PARTS front channel. See
(4) Align and insert the key hole slots of the rear cover of each PIM to the machine screws secured in step (3).
See Figure 003-23.
(PIM)
(REAR COVER)
M4 MACHINE SCREW-B (x 4)
(PROVIDED WITH RACK PARTS)

Figure 003-23 Mounting the PIM to the RACK PARTS

ND-45492 (E)
APPROX. 4 mm (0.2 inch)
(WALL)
SCREW-A (x 4)
(LOCALLY PROVIDED)
RACK PARTS
Figure 003-21.
Figure 003-23.
CHAPTER 3
Page 49
Revision 2.0