NAP 200-006
Sheet 6/7
Cable Running to the MDF
3. Cable Running to the MDFM
(1) Connect the champ connector of each MDF cable to an LTC connector located on a PIM using the screws
provided, as shown in
(2) Pare the sheath of each MDF cable and secure the shield to the front bracket on the PIM using tie wraps,
as shown in
Figure
PIM
MDFM
BASE
CHAPTER 3
Page 84
Revision 2.0
Figure
006-5.
006-5.
PBX
FRONT
TO STATION, etc.
Figure 006-5 Cable Running to the MDFM
LTC CONNECTOR
PIM
SHIELD
TIE WRAP
ND-45492 (E)
CHAMP CONNECTOR
MDF CABLE
25 ~ 30 mm
(1.0 ~ 1.2 inch)