NAP 200-008
Sheet 2/3
Mounting of Circuit Cards
(3) Before mounting the circuit cards, confirm the following items.
•
Wrist Strap is connected to Frame Ground.
•
Switch setting of circuit cards is already completed (Refer to the Circuit Card Manual).
•
The "SW1" switches of all PZ-PW86 Cards are turned off.
(4) Mount circuit cards into their mounting positions according to the "Bay Face Layout" and "Port Assign-
ment Table" given in the System Data Sheet.
Figure 008-2
shows the mounting method of circuit cards.
CARD CONTACT SIDE
WRIST STRAP
Figure 008-2 Mounting of the Circuit Cards
ND-45492 (E)
TO FRAME GROUND CONNECTION
(SEE FIGURE
3-1)
CARD FRONT SIDE
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
CHAPTER 3
Page 143
Revision 2.0