Samsung SRP-350PG - SRP 350 B/W Direct Thermal Printer Service Manual page 77

GS W nL nH
[Name] Set printing area width.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤nL ≤255, 0 ≤nH ≤255
[Description] Sets the printing area width to the area specified by nL and nH.
* The printing area width is set to
[(nL + nH ×256) ×horizontal motion unit] inches.
GS ₩ nL nH
[Name] Set relative vertical print position in page mode.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤nL ≤255, 0 ≤nH ≤255
[Description] Sets the relative vertical print starting position from the current position in page mode.
* This command sets the distance from the current position to
[(nL + nH ×256) ×vertical or horizontal motion unit] inches.
GS ^ r t m
[Name] Execute macro.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤r ≤255, 0 ≤t ≤255
m = 0, 1
[Description] Executes a macro.
* r specifies the number of times to execute the macro.
* t specifies the waiting time for executing the macro.
* m specifies macro executing mode.
When the LSB of m = 0
The macro executes r times continuously at the interval specified by t.
When the LSB of m = 1 :
After waiting for the period specified by t, the PAPER OUT LED
indicators blink and the printer waits for the FEED button to be
pressed. After the button is pressed, the printer executes the macro
once. The printer repeats the operation r times.
8-14
GS W nL nH
1D 57 nL nH
29 87 nL nH
GS nL nH
₩
1D 5C nL nH
29 92 nL nH
GS ^ r t
1D 5E r t
29 94 r t
m
m
m
Command
Samsung Electro-Mechanics