Disassembly And Assembly; Remove The Three Screws - Samsung SRP-350PG - SRP 350 B/W Direct Thermal Printer Service Manual

4-2 Case-Upper Block
Cover Cable
4
Figure 4-5 Disassembly Case-Upper #1
1
Screw (3x4)
4
Screw (3x4)
Figure 4-6 Disassembly Case-Upper #2
Samsung Electro-Mechanics
Screw (3x8)
5
Cover open
3
Screw (3x4)
2
Push Button
1
Case Upper
6
3
Manual Cutter
5
2
Push Button

4 Disassembly and Assembly

1. Push the button 1 to open the Cover-
Open 3 .
2. Remove the four screws 2 .
3. Separate the Cover-Open 3 .
4. Separate the Cover-Cutter 4 .
5. Remove the screws 5 .
1. Remove the two screws 1 .
2. Lift the Case-Upper in the direction of an
arrow 3 during pushing the Push-Button 2 .

3. Remove the three screws 4 .

4. Separate the Manual-Cutter 5 from the
Case-Upper 6 .
4-3