Samsung SRP-350PG - SRP 350 B/W Direct Thermal Printer Service Manual page 66

Command
DLE ENQ n
[Name] Real-time request to printer.
[Format] ASCII
Hex
Decimal
[Range] 1 ≤n ≤2
[Description] Recovers from an error and restart printing from the line where the error occurred.
ESC FF
[Name] Print data in page mode.
[Format] ASCII
Hex
Decimal
[Description] In page mode, prints all buffered data in the printing area collectively.
ESC SP n
[Name] Set right-side character spacing.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤n ≤255
[Description] Sets the character spacing for the right side of the character to
[n ×horizontal or vertical motion units].
ESC ! n
[Name] Select print modes.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤n ≤255
[Description] Selects print mode(s) using n as follows.
Bit Off/On Hex
0 Off 00
On 01
1,2 - -
3 Off 00
On 08
4 Off 00
On 10
5 Off 00
On 20
6 - -
7 Off 00
On 80
ESC $ nL nH
[Name] Set absolute print position.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤n ≤255
0 ≤n ≤255
[Description] Set the distance from the beginning of the line to the position at which subsequent characters are to be
printed.
* The distance from the beginning of the line to the print position is
[(nL + nH ×256) ×(vertical or horizontal notion unit)] inches.
Samsung Electro-Mechanics
DLE ENQ n
10 05 n
16 5 n
ESC FF
1B 0C
27 12
ESC SP n
1B 20 n
27 32 n
ESC ! n
1B 21 n
27 33 n
Decimal Function
0 Character font(12 ×24) selected.
1 Character font(9 ×17) selected.
- Undefined.
0 Emphasized mode not selected.
8 Emphasized mode selected.
0 Double-height mode not selected.
16 Double-height mode selected.
0 Double-width mode not selected.
32 Double-width mode selected.
- Undefined.
0 Underline mode not selected.
128 Underline mode selected.
ESC $ nL n
1B 24 nL n
27 36 nL n
8-3