Samsung SRP-350PG - SRP 350 B/W Direct Thermal Printer Service Manual page 73

ESC t n
[Name] Select character code table.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤n ≤5, n = 255
[Description] Selects a page n from the character code table.
n
0
1
2
3
4
5
19
255
ESC { n
[Name] Turns on / off upside-down printing mode.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤n ≤255
[Description] Turns upside-down printing mode on or off.
* When the LSB of n is 0, upside-down printing mode is turned off.
* When the LSB of n is 1, upside-down printing mode is turned on.
FS p n m
[Name] Print NV bit image.
[Format] ASCII
Hex
Decimal
[Range] 1 ≤n ≤255
0 ≤m ≤3, 48 ≤m ≤51
[Description] Prints a NV bit image n using the mode specified by m.
m Mode
0, 48 Normal
1, 49 Double-width
2, 50 Double-height
3, 51 Quadruple
* n is the number of the NV bit image (defined using the FS q command).
* m specifies the bit image mode.
8-10
ESC t n
1B 74 n
27 116 n
0 (PC437 {USA, standard Europe})
1 (Katakana)
2 (PC850 {Multilingual})
3 (PC860 {Portuguese})
4 (PC863 {Canadian-French})
5 (PC865 {Nordic})
19 (PC858 {Euro})
Space page
ESC { n
1B 7B n
27 123 n
FS p n m
1C 70 n m
28 112 n m
Vertical Dot Density (DPI)
180
180
90
90
Page
Horizontal Dot Density (DPI)
180
90
180
90
Samsung Electro-Mechanics
Command