Samsung SRP-350PG - SRP 350 B/W Direct Thermal Printer Service Manual page 72

Command
ESC c 4 n
[Name] Select paper sensor(s) to stop printing.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤nL ≤255
[Description] Selects the paper sensor(s) used to stop printing when a paper-end is detected, using n as follows :
Bit Off/On
0 Off
On
1 Off
On
2-7 -
ESC c 5 n
[Name] Enable / Disable panel button.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤n ≤255
[Description] Enables or disables the panel button.
* When the LSB of n is 0, the panel buttons are enabled.
* When the LSB of n is 1, the panel buttons are disabled.
ESC d n
[Name] Print and feed n lines.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤n ≤255
[Description] Prints the data in the print buffer and feeds n lines.
ESC p m t1 t2
[Name] Generate pulse.
ASCII
[Format]
Hex
Decimal
[Range] m = 0, 1, 48, 49
0 ≤t1 ≤255, 0 ≤t2 ≤255
[Description] Outputs the pulse specified by t1 and t2 to connector pin m as follows.
m
0, 48
1, 49
Samsung Electro-Mechanics
ESC c 4 n
1B 63 34 n
27 99 52 n
Hex Decimal
00 0
01 1
00 0
02 2
- -
ESC c 3 n
1B 63 35 n
27 99 53 n
ESC d n
1B 64 n
27 100 n
ESC p m t1
1B 70 m
27 112 m t1
Connector pin
Drawer kick-out connector pin 2
Drawer kick-out connector pin 5
Paper roll end sensor disable.
Paper roll end sensor enable.
Paper roll end sensor disable.
Paper roll end sensor enable.
Undefined.
t2
t1 t2
t2
Function
8-9