Show Bridge Address-Table Count - HP BladeSystem bc2000 - Blade PC Reference Manual
Command line interface reference guide hp bladesystem pc blade switch
Hide thumbs
Also See for BladeSystem bc2000 - Blade PC:
- User manual (216 pages) ,
- Administrator's manual (104 pages) ,
- Setup and installation manual (104 pages)
Table of Contents
Advertisement
Address Table Commands
show bridge address-table count
The show bridge address-table count Privileged EXEC mode command displays the number of
addresses present in the Forwarding Database.
Syntax
show bridge address-table coun
port-channel-number]
Parameters
vlan — Specifies a valid VLAN, such as VLAN 1.
n
interface — A valid Ethernet port.
n
port-channel-number — A valid port-channel number.
n
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the number of addresses present in all VLANs.
Console# show bridge address-table count
Capacity: 8192
Free: 8083
Used: 109
Secure addresses: 2
Static addresses: 1
Dynamic addresses: 97
Internal addresses: 9
5-16
[vlan vlan][ ethernet interface-number | port-channel
t
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
