Spanning-Tree Pvst-Interop - HP BladeSystem bc2000 - Blade PC Reference Manual

Spanning-Tree Commands

spanning-tree pvst-interop

The spanning-tree pvst-interop privileged EXEC command configures the device for
PVST/PVST+ interoperability.
Syntax
spanning-tree pvst-interop
.
To disable this feature, see the
Parameters
This command has no arguments or keywords.
Default Setting
Enabled
Command Modes
Privileged EXEC
Command Usage
Before enabling this command the following is required:
All switch ports set to port mode Access
n
Number of configured VLANs is less then 16
n
If there is a VLAN to MSTP mapping, the software asks the user to confirm that the existing
mapping will be deleted.
This command performs the following:
Enable MSTP
n
Map each VLAN to MSTP instance
n
Enable spanning-tree mst mstp-rstp feature
n
The commands that shown in the startup-config, or running-config files, are the configuration
commands executed by the script and not the command itself.
Example
The following command executes a script that configures the device for PVST/PVST+
interoperability.
Console# spanning-tree pvst-interop
22-38
"spanning-tree mst mstp-rstp"
www.hp.com
command.
HP PC Blade Switch CLI Reference Guide