Show Copper-Ports Tdr - HP BladeSystem bc2000 - Blade PC Reference Manual

PHY Diagnostics Commands

show copper-ports tdr

The show copper-ports tdr User EXEC mode command displays information on the last Time
Domain Reflectometry (TDR) test performed on copper ports.
Syntax
show copper-ports tdr [interface]
Parameters
interface — A valid Ethernet port. (Full syntax: port)
n
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
The maximum length of the cable for the TDR test is 120 meters.
Example
The following command displays information on the last TDR test performed on all copper
ports.
Console> show copper-ports tdr
Port
----
e43
e44
e45
e46
15-2
Result
------
Short
Test has not been performed
Open
Fiber
www.hp.com
Length [meters] Date
--------------- ----
50 13:32:00 23 July 2005
64 13:32:00 23 July 2005
- -
HP PC Blade Switch CLI Reference Guide