Bridge Aging-Time - HP BladeSystem bc2000 - Blade PC Reference Manual

Address Table Commands

bridge aging-time

The bridge aging-time Global Configuration mode command sets the address table aging time.
To restore the default configuration, use the no form of this command.
Syntax
bridge aging-time seconds
no bridge aging-time
Parameters
seconds — Time in seconds. (Range: 10-630 seconds)
n
Default Setting
The default is 300 seconds.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command sets the bridge aging time to 250 seconds.
Console(config)# bridge aging-time 250
5-8 www.hp.com HP PC Blade Switch CLI Reference Guide