Mac Access-List - HP BladeSystem bc2000 - Blade PC Reference Manual

mac access-list

The mac access-list Global Configuration mode command enables the MAC-Access List
Configuration mode and creates Layer 2 ACLs. To delete an ACL, use the no form of this
command.
Syntax
mac access-list name
no mac access-list name
Parameters
name — Specifies the name of the ACL.
n
Default Setting
The default for all ACLs is deny all.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command creates a MAC ACL.
Console(config)# mac access-list macl-acl1
Console(config-mac-al)#
HP PC Blade Switch CLI Reference Guide www.hp.com
ACL Commands
4-7