Ip Igmp Static-Group - Dell 8 Command Reference Manual

12

ip igmp static-group

ip igmp static-group
Configures the static group membership entries.
Synopsis ip igmp static-group A.B.C.D {interface [{in | ex}tengigabitethernet slot/port] interface port-channel
number}
no ip igmp static-group A.B.C.D {interface [{in | ex}tengigabitethernet slot/port] interface
port-channel number}
Operands A.B.C.D
interface
Description Using ip igmp static-group, packets to the group are fast-switched out of the interface, providing
that the packets were received on the correct reverse path forwarding (RPF) interface. Static group
membership entries are automatically added to the IGMP cache and mroute table.
Defaults There are no defaults for this command.
Command Privileged EXEC Mode
Modes
User Guidelines There are no user guidelines for this command.
Example none
See Also none
212
Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in the
multicast group.
Use this keyword to specify any of the following interfaces:
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
port-channel number
Specifies the interface is a port-channel. The range of valid values is 1-63.
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01