Mode - Dell 8 Command Reference Manual
Dell converged enhanced ethernet command reference
Hide thumbs
Also See for 8:
- Owner's manual (346 pages) ,
- Update manual (186 pages) ,
- Getting started manual (172 pages)
Table of Contents
Advertisement
6
mode
mode
Sets the LLDP mode on the switch.
Synopsis
mode tx | rx
no mode
Operands
tx
rx
Defaults
Both transmit and receive modes are enabled.
Command
Protocol LLDP configuration mode
Modes
Description
Use this command to set the LLDP mode on the switch. Use the no mode command to return to the
default setting.
Usage
There are no usage guidelines for this command.
Guidelines
Examples
To enable only the transmit mode:
See Also
show lldp
110
Specifies to enable only the transmit mode.
Specifies to enable only the receive mode.
switch(conf-lldp)#mode tx
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Advertisement
Table of Contents
