Mac Access-List Standard - Dell 8 Command Reference Manual

10

mac access-list standard

mac access-list standard
Creates and assigns a name to the standard MAC access list.
Synopsis mac access-list standard name
no mac access-list standard name
Operands name
Command Global configuration mode
Modes
Description Use this command to create a standard MAC access list. If ACL is already created, this command
puts the switch in the standard MAC access-list configuration mode. Use the no mac access-list
standard command to remove the access list.
Standard ACLs allow you to filter traffic based on the source MAC address. You can apply named
MAC standard ACLs to VLANs and to Layer 2 interfaces.
Usage Standard and extended MAC ACLs cannot share the same name.
Guidelines
Example To create a MAC standard ACL named mac1:
To delete a MAC standard ACL named mac1:
See Also deny, permit, show access-lists
146
Assigns a name to the MAC standard access list. The maximum character
limit is 64.
switch(config)#mac access-list standard mac1
switch(conf-macl-std)#
switch(config)#no mac access-list standard mac1
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01