Dell 8 Command Reference Manual page 18

1
CLI command modes
TABLE 2
Accessing the CEE CLI command modes
Command Prompt
mode
EXEC switch>
Privileged switch#
EXEC
Global switch(config)#
configuration
Interface Port-channel:
configuration
switch (conf-if-po-63)#
10-Gigabit Ethernet (CEE port):
switch (conf-if-te-0/1)#
VLAN:
switch (conf-if-vl-1)#
Protocol LLDP:
configuration
switch (conf-lldp)#
Spanning-tree:
switch (conf-mstp)#
switch (conf-rstp)#
switch (conf-stp)#
Console and switch (config-line)#
VTY (line)
configuration
Feature CEE map:
configuration
switch (config-ceemap)#
FCoE map:
switch (config-fcoe-map)#
Standard ACL:
switch (conf-macl-std)#
Extended ACL:
switch (conf-macl-ext)#
Port Mirror:
switch(config-mon-sess-1
2
How to access the command mode
Enter the cmsh command at the
Fabric OS prompt after you have
logged in as an appropriate user.
From the EXEC mode, enter the
enable command.
From the EXEC mode, enter the
configure terminal EXEC command.
From the global configuration mode,
specify an interface by entering one
of the following interface types:
•
interface port-channel
•
interface
•
interface vlan
From the global configuration mode,
specify a protocol by entering one of
the following protocol types:
•
protocol lldp
•
protocol spanning-tree mstp
•
protocol spanning-tree rstp
•
protocol spanning-tree stp
From the global configuration mode,
configure a terminal connected
through the console port by entering
the line console command.
Configure a terminal connected
through a Telnet session by entering
the line vty command.
From the global configuration mode,
specify a feature by entering one of
the following feature names:
•
cee-map
•
fcoe-map
•
mac access-list
•
monitor session
Dell Converged Enhanced Ethernet Command Reference
Description
Display running system information
and set terminal line parameters.
This is the administrative mode
which also includes EXEC mode
commands and allows you to display
and change system parameters.
Configure features that affect the
entire switch.
Access and configure individual
interfaces.
Access and configure protocols.
Configure a terminal connected
through the console port or a
terminal connected through a Telnet
session.
Access and configure CEE, FCoE,
Port Mirroring, and ACL features.
53-1002115-01