Debug Ip - Dell 8 Command Reference Manual

5

debug ip

debug ip
Displays the IGMP and ICMP traffic on the switch.
Synopsis debug ip {[packet {[interface interface-type interface-number] | [count tx | rx]]}] | [icmp {[interface
interface-type interface-number] | [count tx | rx]}] | [igmp {[interface interface-type
interface-number] | [all] | [group multicast-grp-address]}]
Operands packet
interface
count
icmp
igmp
group
Description Use this command to display all IGMP or ICMP packets received or transmitted. Can be enabled
globally, per interface, or on a multicast group.
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
User Guidelines There are no usage guidelines for this command.
Example none
See Also none
82
Enable IP packet debugging.
Displays the IP traffic for the specified interface only.
interface-type Network interface type (external TenGigabitEthernet interface, null,
port-channel, or VLAN).
interface-number
Layer-2 or layer-3 Interface number.
Stops display after display count packets.
tx Counts only transmitted packets.
rx Counts only received packets.
Displays the ICMP packets.
Displays the IGMP packets.
all Enable all IGMP debugging.
Enable IGMP debugging for multicast group.
multicast-grp-address
Multicast group address.
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01