sFlow Commands
sflow collector
Identifies the sFlow collectors to which sFlow datagrams are forwarded.
Synopsis
sflow collector ip-address
no sflow collector
Operands
ip-address
Defaults
There are no defaults for this command.
Command
Interface Mode
Modes
Description
Use this command to identify the sFlow collectors to which sFlow datagrams are forwarded.
Use the no sflow collector ip-address command to reset the specified collector address to a null
value.
Usage
You can only specify one sFlow collector.
Guidelines
Examples
To identify the sFlow collectors for the IP address 192.10.138.176 to which sFlow datagrams are
forwarded:
See Also
none
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the IP address in the dotted decimal format for the collector.
switch(conf-if-te-0/1)#sFlow collector 192.10.138.176
Chapter
13
217