Show Qos Queue Interface - Dell 8 Command Reference Manual

show qos queue interface

Displays the runtime state retrieved from the interface reflecting the number of packets and bytes
sent and received for each priority.
Synopsis show qos queue interface {{in | ex}tengigabitethernet slot/port | all}
Operands interface
Command EXEC mode
Modes
Description Use this command to display the runtime state retrieved from the interface reflecting the number of
packets and bytes sent and received for each priority.
Usage For a stand-alone switch, all ASICs are considered as slot number zero (0).
Guidelines
Examples To display the queueing information for a 10 Gbps Ethernet interface:
See Also qos maps, cee-map
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Use this keyword to specify any of the following interfaces:
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
all Reports QoS statistics for all 10 Gbps interfaces within the system.
switch#show qos queue interface intengigabitethernet 0/2
Interface InTenGigabitEthernet 0/2
RX
CoS Packets
-------------------------------
0 680458
1 0
2 0
3 0
4 0
5 0
6 0
7 0
RX
Bytes TC
-------------------------------
87098624 0
0 1
0 2
0 3
0 4
0 5
0 6
0 7
show qos queue interface
TX TX
Packets Bytes
0
32318
0
0
0
0
0
0
16
0
0
0
0
0
0
0
0
263