Yamaha DME Designer Owner's Manual page 86

Chapter 3 Main Panel Window
• [Time Adjustment]
86 DME Designer Owner's Manual
GPI input can be used to adjust the DME internal clock as follows:
Internal clock time
0~14 seconds
15~29 seconds
30~44 seconds
45~59 seconds
[Parameter], [Min], and [Max] are not available.
[Terminal] determines how the GPI input voltage will affect the specified parameter.
and specify continuous control of continuously-variable parameters from an external
fader, knob, or similar device.
and specify on/off control of 2-state parameters via an external switching device.
The internal clock time will be adjusted each time the voltage applied to GPI IN rises from below to
above the median voltage.*
Max. voltage applied to GPI IN
Min. voltage applied to GPI IN
The internal clock time will be adjusted each time the voltage applied to GPI IN drops from above to
below the median voltage.*
Max. voltage applied to GPI IN
Min. voltage applied to GPI IN
Same as .
Same as .
Time after adjustment
Returned to 0 seconds
Advanced to 30 seconds
Returned to 30 seconds
Advanced to 0 seconds
Median voltage
Trigger
Trigger
Median voltage