Fader - Yamaha DME Designer Owner's Manual

Chapter 6 Component Guide

Fader

Controls the output level for each channel. Fader components are available for 1, 2, 4, 8, 12, and 16
channels.
Double-click a component to display the component editor for it. The number of channels varies, but
all components share a common configuration in the component editor.
1
2
3
4
[Fade]
Sets the action of the fader when there is a large change in its position during scene recall. When
you turn this ON, the fader moves gradually to the position after the jump. If you turn this OFF, it
immediately jumps to the parameters saved in the recalled scene.
See "The 'Scene Manager' Dialog Box"
be faded and the time period when the [Fade] is On.
348 DME Designer Owner's Manual
Fader component editor
1
2
3
4
Parameter Setting Range
Phase ON/OFF
On ON/OFF
Fader - to +10 dB
Fade ON/OFF
Reverses the phase of the output signal for each
channel.
Turns ON each channel's output.
Sets the output signal level for each channel.
Sets fade during scene recall ON or OFF.
(page 63) for details about settings for the components to
Function