Adding, Deleting, And Renaming A Configuration - Yamaha DME Designer Owner's Manual

Adding, Deleting, and Renaming a Configuration
At least one configuration is included within a zone. In a new Zone that configuration will be named
[Configuration1]. You can add configurations as required.
When you click the [Configuration] command on the [Tools] menu, the "Configuration" dialog box is
displayed. Here you can add, delete, or rename a configuration.
Configurations
Lists the configurations included in the zone being edited. To change settings for a configuration,
select it by clicking it in the list.
[Add] Button
Adds a configuration. Clicking here displays the "Please enter new name" dialog box. Enter a
configuration name, then click [OK]. A configuration will be added.
[Delete] Button
Deletes the configuration selected on the list. Clicking here displays the "Are you sure?" dialog
box. Click the [OK] button, and the configuration will be deleted. Click the [Cancel] button, and the
deletion will be cancelled.
NOTE
A minimum of one configuration is required. When only one configuration remains, deletion is impossible.
Chapter 4 Designer
DME Designer Owner's Manual 233