Chapter 3 Main Panel Window
DAW Control
When you click [DAW Control] on the [Tools] menu, the "DAW Control" dialog box is displayed. Here
you can make settings for when the DME is controlled from a DAW controller. This is set for each zone
configuration. The setting can be made only when in offline status.
NOTE
DAW control editing can be performed only by users for whom the [Edit] security checkbox has been checked.
[DME]
From the list, select the DME you want to set. The DMEs included in the current zone are displayed in
the list.
[DAW Type]
Select the DAW type. The following choices are in the list: [Off], [Type1], and [Type2].
DAW Control Table
The following can be set for each channel from 1 to 64: [Function], [Controller], [Label], [Parameter].
[Function]
Selects the function that will be changed by the DAW controller. If you click here, a list will be
displayed.
132
DME Designer Owner's Manual