Yamaha DME Designer Owner's Manual page 341

8
Release 44.1 kHz: 6 ms to 46 s
48 kHz: 5 ms to 42.3 s
88.2 kHz: 3 ms to 23 s
96 kHz: 3 ms to 21.1 s
9
Gain ±0 dB to +18 dB
)
KeyIn Mono
Stereo
!
On ON/OFF
Gate
Attenuates signals that are lower than the threshold level. Both mono channel and stereo channel
gates are provided.
Mono channel gates have one input, one output, and one KeyIn input. Stereo channel gates have two
inputs, two outputs, and one KeyIn input.
Double-click a component to open the component editor for it. The parameters are the same for mono
channel and stereo channel components.
SELF
KEYIN
L
R
LR BOTH
KEYIN
+20
+10
0
Knee= Hard
–10
Ratio = 2 : 1
–20
–30
–40
–50
–60
–70
–70 –60 –50 –40 –30 –20 –10 0 +10 +20
Input Level (dB)
Gate component editor
1
2 3
Chapter 6 Component Guide
Sets the release time.
The setting range may very, depending on the
operating frequency.
Sets the output gain.
Selects the trigger source from a menu. The
currently selected trigger source is displayed on the
button.
Turns the expander ON.
Threshold= –10dB
4 5 6
7 8
9 )
DME Designer Owner's Manual 341