Yamaha RX-V750 Owner's Manual page 41

• Downmixing to 2 channels
Yuu can enjoy 2-channel stereo playback even fronl nmlti-
chau[lel sources.
Rotate PROGRAM (or press STEREO on the
remote control) to select 2ch Stereo.
PROGRAM
Front panel
or
_TEnEO HAL JAZZ _CK
C_DTS PUn_DJ_E_ _GHT EXmS
Remote control
You can use a subwootcr wifll this progranl when SWFR or
BOTH is selected in "BASS OUT".
• Listening to unprocessed input signals
In STRAIGHT mode, t'a.o channel stereo sources are
output from only the front left and right speakers. Multi-
channel sources are decoded straight into the appropriate
channels without any additional effect processing.
Press STRAIGHT (EFFECT) to select STRAIGHT.
STRAIGHT
or
E_FECT
Front panel Remote control
t"'"i"i"H"lTl",ii'T'
".lf'Ph,,llr'H"ll
Press STRAIGHT (EFFECT) again so that "STRAIGHT"
disappears from the display when you want to turn the
sound effect back on.
• Virtual CINEMA DSP
Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP programs without surround speakers. It creates
virtual speakers to reproduce the natural sound field.
If you do not connect surround speakers, Virtual CINEMA
DSP activates automatically whenever you select a
CINEMA DSP sound field program.
Virtual CINEMA DSP will not activate, even when "SURR L/R
SP" is set to NONE (see page 54) in the lollowing cases:
When MULTI CH INPUT is selected as the input source.
When headphones are connected to the PHONES jack.
This unit comes with a variety of input jacks. Do the
fullowing to select the type of input signals you want to
use,
1 Rotate INPUT to select the input source.
iNPUT
2
Press INPUT MODE to select an input mode.
In most cases, use AUTO.
sP VOLU_E
i"_ii ih r3i ii 7_
r
Input source Input mode
,,,.,......., ,, Automatically selects input signals in
the following order:
1) Digital signals ;_
2) Analog signals
_r,v,:::,., Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
_...,""i"_r"_...,....,...,,..._r'"::: Selects only analog signals. If no
analog signals are input, no sound is
output.
':: If this unit detects a Dolby Digital or DTS signah the
decoder automatically switches to the appropriate sound
field program.
-4¢-
YOu can at[iust the delaull inpul mode this unit selects when the
power is mined on (see page 59).
37