Yamaha RX-V750 Owner's Manual page 10

E_o]_Vll;fo]l_*f__y_Vel_lhffO_Jl[oJ_vl_
This section describes the tunction of each control on the
remote control used to control this unit. To operate other
components, see "REMOTE CONTROL FEATURES" on
page 62.
@ @
@ .........
0 ......... --@
@........... @
..............
Q .............
POWER POWER
@
0 Infrared window
Outputs infrared control signals. Aim this x_,indow at the
component you want to operate.
O TRANSMIT indicator
Fhtshes while the remote control is sending signals.
O STANDBY
Sets this unit in the standby mode.
O SYSTEM POWER
Turns on the power of this unit.
O Input selector buttons
Select the input source and change the control area.
O Display window
Shows the name of the selected source component that
you can control.
O LEVEL
Selects the speaker channel to he adjusted and sets the
level.
O Cursor buttons/,, / -,/ / < / > / SELECT
Use to select and adjust sound fiekt program parameters or
SET MENU items.
Press _ / ) to select preset station numbers when the unit is
in tuner mode.
O TEST (RETURN)
Ontputs the test tone to adjust the speaker levels.
Returns to the previous menu level when adjusting the
SET MENU parameters.
@ Sound field program / Numeric buttons (1 - 8)
Use to select sound field programs.
Use numbers 1 through 8 to select preset stations when the
unit is in tuner mode.
• RE-NAME
Use to change the input source name in the display
window (see page 67).
@ CLEAR
Use to clear fnnctions acquired when using the learn and
rename features, or setting manufacturer codes (see
page 68).
_)
LEARN
Use to set up manuf:tcturer codes or program functions
from other remote controls (see pages 63 and 66).
_l_ SLEEP
Sets the sleep timer.
_1 INPUT MODE
Sets the priority (AUTO, DTS, ANALOG) for the type of
signals received when one component is connected to two
or more of this unit's input jacks (see page 37).