Yamaha 02R96 Owner's Manual page 36

36
Chapter 2—Control Surface & Rear Panel
G
STEREO ASSIGN 1 button
This button is used to select the assigned Output Channel as the Control Room Monitor
signal source. Its indicator lights up when this source is selected. See "Control Room Setup"
on page 137 for more information.
H
STEREO ASSIGN 2 button
This button is used to select the assigned Output Channel as the Control Room Monitor
signal source. Its indicator lights up when this source is selected. See "Control Room Setup"
on page 137 for more information.
I
SURROUND BUS button
This button is used to select the Bus Outs as the Surround Monitor signal source. Its indi-
cator lights up when this source is selected. See "Surround Monitoring" on page 138 for
more information.
J
SURROUND SLOT button
This button is used to select the assigned Slot's Inputs as the Surround Monitor signal
source. Its indicator lights up when this source is selected. See "Surround Monitoring" on
page 138 for more information.
K
SURROUND MONITOR LEVEL control
This control is used to adjust the level of the Surround Monitor signals. See "Surround
Monitoring" on page 138 for more information.
L
CONTROL ROOM LEVEL control
This control is used to adjust the level of the Control Room Monitor signal. See "Control
Room Monitoring" on page 136 for more information.
M
DIMMER button
This button is used to dim the Control Room Monitor and Surround Monitor signals. Its
indicator lights up when these signals are dimmed. See "Control Room Monitoring" on
page 136 for more information.
N
TALKBACK button
This button is used to turn on the Talkback function, which distributes the Talkback mic
signal to the Studio Monitor Outs, Slot Inputs and Omni Outputs specified on the Talkback
Setup page. See "Using Talkback" on page 142 for more information.
02R96 Version 2—Owner's Manual