Configuring The 02R96; Configuring Pro Tools - Yamaha 02R96 Owner's Manual

Configuring the 02R96
Use the DISPLAY ACCESS [SETUP] button to locate the MIDI/TO HOST Setup
1
page, and use the DAW parameter to specify the port to which Pro Tools is
connected.
See "MIDI Port Setup" on page 191 for more information.
2 Use the DISPLAY ACCESS [REMOTE] button to locate the Remote page, and
set the target to Pro Tools.
See "Assigning a Target to the Remote Layer" on page 219 for more information.
3 Use the LAYER [REMOTE] button to select the Remote Layer.
When the Pro Tools Remote Layer is selected, the 02R96's control surface controls Pro
Tools, not the 02R96. In order to control the 02R96, you need to select an Input Channel
Layer or the Master Layer. Audio mixing on the other Layers and Automix continues while
the Pro Tools Layer is selected.
Configuring Pro Tools
Pro Tools needs to be configured as follows. For more information, see your Pro Tools doc-
umentation.
Launch Pro Tools.
1
If you are using MacOS 8.6 - 9.2.2, choose OMS Studio Setup from the Setups
2
menu, and configure OMS as necessary.
This screen shot shows the Yamaha USB MIDI driver with eight ports. An OMS-compatible
device profile for the 02R96 is included on the 02R96 CD-ROM. See the included docu-
mentation for more information.
3 Choose Peripherals from the Setups menu.

Configuring the 02R96

02R96 Version 2—Owner's Manual
197