Yamaha 02R96 Owner's Manual page 200

200
Chapter 18—Pro Tools Remote Layer
INSERT ASSIGN/EDIT Display Mode
Press the [F2] button to select this mode.
ASSIGN: This indicator flashes when the EFFECTS/PLUG-INS [1] (ASSIGN) button is
pressed. See "Assigning Inserts/Plug-ins" on page 212 for more information.
COMPARE: This indicator appears highlighted when the EFFECTS/PLUG-INS [2]
(COMPARE) button is pressed. See "Editing Plug-ins" on page 213 for more information.
BYPASS: This indicator appears highlighted when the EFFECTS/PLUG-INS [3]
(BYPASS) button is pressed. See "Editing Plug-ins" on page 213 and "Bypassing Plug-ins"
on page 214 for more information.
INSERT: This indicator appears highlighted when the EFFECTS/PLUG-INS [4]
(INSERT/ASSIGN) button is pressed. See "Editing Plug-ins" on page 213 for more infor-
mation.
INSERT/PARAM Display
This section displays mainly insert and plug-in-related information, although other mes-
sages are also displayed here.
Encoder Display
This section displays information about the Parameter controls 1–4. The SEL indicators
show the on/off status of the Parameter control push-switches. The rotary control indica-
tors show the positions of the Parameter controls. The "O" symbol below each Parameter
control shows the automation status for each Parameter control.
Channel Display Mode
Press the [F3] button to select this display mode.
In this display mode, controls for the parameters currently assigned to the Encoders are dis-
played (e.g., pan or aux send). When displaying panpots, the small circles inside the
Encoder icons are highlighted when pan is at center. The name of each channel is displayed
below the Encoder icons. Automation mode settings, aux send destinations, and aux send
pre/post settings can also be displayed here. See "Viewing the Automation Mode" on
page 216, "Viewing Send Destinations" on page 210, and "Configuring Sends as Pre or
Post" on page 210 respectively for more information.
02R96 Version 2—Owner's Manual