Yamaha 02R96 Owner's Manual page 133

133
Viewing Channel Fader Settings
GROUP: These buttons indicate which Fader, Mute, EQ, or Comp group, if any, the cur-
rently selected Aux Send is in.
Stereo Out
Below is the Fader View page for the Stereo Out. The settings of the left and right channels
of the Stereo Out can be viewed individually. Use the STEREO [SEL] button to toggle
between the left and right channels.
BAL: This is the Balance parameter for the Stereo Out. Select this parameter using the cur-
sor buttons, then press the [ENTER] button to set the parameter to Center. See "Balancing
the Stereo Out" on page 94 for more information.
ON/OFF: This is the On/Off parameter of the Stereo Out. See "Muting the Stereo Out
(ON/OFF)" on page 93 for more information.
Fader: This indicates the fader position of the Stereo Out. The fader knob appears high-
lighted when the fader is set to 0.0 dB. The fader position is displayed numerically below the
fader. See "Setting the Stereo Out Level" on page 93 for more information.
Meters: These meters indicate the levels of the Stereo Out. The metering position is dis-
played below them.
GROUP: These buttons indicate which Fader, Mute, EQ, or Comp group, if any, the Stereo
Out is in.
02R96 Version 2—Owner's Manual