Table of Contents
Advertisement
7
Installing the Belt Guard
No Parts Required
Procedure
1.
Align the belt guard, capscrews, and flange-head
bolts with the holes in the side frame plate and
the spring bracket
Figure 39
1. Capscrews
2.
Assemble the belt guard to the machine with the
2 capscrews, and 2 flange-head bolts
39).
3.
Torque the capscrews and flange-head bolts to
1378 to 2542 N∙cm (175 to 225 in-lb).
8
Installing the Decals
Parts needed for this procedure:
1
Decal (machine production date)
1
Decal (sound)
Procedure
1.
Remove the backing from the machine
production date decal.
2.
Apply the decal to the back of the machine as
shown in
Figure
(Figure
39).
2. Flange-head bolts
(Figure
40.
1. Sound decal
3.
Remove the backing from the sound decal.
4.
Apply the decal to the back of the machine as
shown in
g289447
16
Figure 40
2. Machine production date
decal
Figure
40.
g289440
Advertisement
Table of Contents
