Table of Contents
Advertisement
Figure 29
1. Hook (return arm)
5
Routing and Connecting
the Transmission Reverse
Switch
Parts needed for this procedure:
Procedure
1.
Route the wire harness of the transmission
reverse switch toward the left side of the
machine and up
Figure 30
1. Top of the machine
2. Left side of the machine
2.
Route the wire harness along the edge clip/cable
tie, and secure the wire harness with the cable
tie
(Figure
31).
2. Spring
(Figure
30).
3. Wire harness
(transmission reverse
switch)
g289445
1. 2-pin connector
(transmission reverse
switch)
3.
Plug the 2-pin connector of the reverse switch
harness into the 2-socket connector of the wire
harness from the kit
1. 2-socket connector (wire
harness)
g289449
13
Figure 31
2. Edge clip/cable tie
(Figure
32).
Figure 32
2. 2-pin connector (reverse
switch harness)
g289450
g289446
Advertisement
Table of Contents
