Toro 135-6822 Installation Instructions Manual page 15

Figure 36
1. Flange nut
Installing the CE Exhaust guard
1.
Align the mounting tabs of the CE exhaust guard
over the studs of the muffler
Figure 37
2. Loosely assemble the exhaust to the guard
mount on the exhaust duct with the flange head
bolt (Figure 38).
g289192
(Figure 37).
g289137
15
Figure 38
1. Flange nut (loosen only)
2. Flange nut (remove)
3. Stud
3. Assemble the flange nut that secures the
exhaust guard to the stud at the top of the
muffler (Figure 38).
4. Tighten the flange nuts and flange-head bolt
at the inboard, top, and outboard side of the
exhaust guard.
g289138
4. Flange-head bolt
5. Exhaust guard