Table of Contents
Advertisement
Chassis specifications
Summary of the specifications of the ThinkSystem D3 Chassis.
Technical specifications
Table 2. Chassis technical specifications
Specification
Electrical input
Mechanical specifications
Important: For safety, make sure that there is no node or power supply unit installed in the chassis when
removing or installing the chassis from or to the rack.
Table 3. Chassis mechanical specifications
Specification
Dimension
Note: For the supported nodes for the D3 chassis, see
4
ThinkSystem D3 Chassis User Guide
Description
The system supports up to three hot-swap power supplies:
• CRPS 1300-watt Titanium, input power 200-240V
• CRPS 1300-watt Platinum, input power 200-240V
• CRPS 1600-watt Titanium, input power 200-240V
• CRPS 2700-watt Titanium, input power 200-240V
• CRPS 2700-watt Platinum, input power 200-240V
Supported power supply configurations:
• 3 PSUs: 2+1 without over-subscription (optional redundancy)
• 2 PSUs: 1+1 without over-subscription (optional redundancy)
• 1 PSU: 1+0 only for 2700-watt CRPS PSU, without over-subscription
Important: Power supplies and redundant power supplies in the chassis must be of
the same brand, power rating, wattage, or efficiency level, with the same latch color.
Note: The actual power efficiency depends on system configuration.
Description
2U rack-mounted chassis (2U2N or 2U4N)
• Height: 87 mm (3.43 inches)
• Depth: 898 mm (35.36 inches)
• Width: 448 mm (17.64 inches)
• Weight:
– Empty chassis (with chassis midplane and PSU cage): 11.83 kg (26.08 lbs)
– Maximum (with up to four 1U or up to two 2U nodes and three CRPS power
supplies installed): approximately 42.37 kg (93.41 lbs)
"Chassis front view" on page
5.
Advertisement
Table of Contents
