Cab Maintenance
Important:
Do not use brackish or reclaimed
water to clean the machine.
Filling the Washer-Fluid
Bottle
1.
Perform the pre-maintenance procedure; refer
to
Maintenance Safety (page
2.
Open the hood and locate the washer-fluid bottle
(Figure
53).
Figure 53
Washer-Fluid Bottle with Washer-Fluid Symbol
3.
Fill the bottle with washer fluid as needed.
4.
Close the hood.
Cleaning the Cab Air Filters
Service Interval: Every 250 hours
1.
Remove the screws and grates from both the
in-cab and rear cab air filters
Figure
55).
32).
g028438
(Figure 54
and
53
Figure 54
In-Cab Air Filter
1. Filter
2. Grate
Figure 55
Rear Cab Air Filter
1. Filter
2. Grate
2.
Clean the filters by blowing clean, oil-free,
compressed air through them.
Important:
If either filter has a hole, tear, or
other damage, replace the filter.
3.
Install the filters and the grate with the
thumbscrews.
g028378
3. Screw
g028379
3. Screw