Table of Contents
Advertisement
Notation for Areas of Concern
Inspection performed by:
Item
Pre-Maintenance
Procedures
CAUTION
If you leave the key in the key switch,
someone could accidently start the engine
and seriously injure you or other bystanders.
Remove the key from the key switch before
you do any maintenance.
Using the Hood-Prop Rod
1.
Release the hood latches.
2.
Lift up the hood until you can position the prop
rod behind the frame tube
3.
Lower the hood until the prop rod is in front of
and resting against the frame tube.
4.
To lower the hood, raise the hood until you can
raise the prop rod above the frame tube, then
lower the hood.
5.
Secure the hood latches.
1. Prop rod
(Figure
28).
Figure 28
Date
Lubrication
Greasing the Bearings and
Bushings
Service Interval: Every 50 hours Grease the bearing
The machine has grease fittings that you must
lubricate regularly with No. 2 lithium grease. Lubricate
the grease fittings immediately after every washing,
regardless of interval specified.
1.
Wipe the grease fittings clean so that foreign
matter cannot be forced into the bearing or
bushing
(Figure
2.
Pump the grease into the fittings.
3.
Wipe off any excess grease.
g015806
35
Information
and bushing grease fittings more
frequently in extremely dusty and
dirty conditions.
29).
Advertisement
Table of Contents
