Toro Groundsmaster 31223TE Operator's Manual page 10

Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator's Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions
on that day and at that site. Changes in the terrain can result in a change in slope operation for the machine. If possible, keep the
cutting units lowered to the ground while operating the machine on slopes. Raising the cutting units while operating on slopes can
cause the machine to become unstable.
1. Tipping hazard—do not mow across slopes greater than 19
degrees; do not mow up and down slopes greater than 20
degrees.
2. Tipping hazard—do not mow across slopes greater than 20
degrees; do not mow up and down slopes greater than 20
degrees.
3. Tipping hazard—do not mow across slopes greater than 21
degrees; do not mow up and down slopes greater than 21
degrees.
138-8203
4. Tipping hazard—do not mow across slopes greater than 22
degrees; do not mow up and down slopes greater than 22
degrees.
5. Tipping hazard—do not mow across slopes greater than 23
degrees; do not mow up and down slopes greater than 23
degrees.
6. Read the Operator's Manual.
10
decal138-8203