Fujitsu AIRSTAGE UTY-ASGX Manual page 85

Table of Contents

Enlarge

Specify the read CSV file by full path.

A file reference dialog box is displayed by clicking the

When a file other than a CSV file created by commissioning tool was specified when

the path is incorrect, a commissioning report is not generated.

Specify the correct file.

Create "SystemList" and "TestRunResult" which read the CSV file specified at

by clicking the

*1 This template is created by Excel spreadsheet program.

Note

Excel must be purchased separately.

When opening the file, you may be asked if you want to enable macro,

depending on the security level set within Excel. In such cases, select "Enable

Macros".

[SystemListTemplate.xls] is in the folder specified when installing the Service

Tool. When an address other than the default installation address was speci-

fied, check that folder.

When OS is 6( bit, the folder is C:\Program Files(x86)\VRF System\Servic-

eTool\.

When you want to change the displayed sheet, click the sheet heading at the

bottom of the screen. (See the following figure.)

Since generation is not automatic, the necessary items are inputted manually.

button.

Table of Contents

Troubleshooting