Mismatched Unit List - Fujitsu AIRSTAGE UTY-ASGX Manual

Table of Contents

3-2-6

Mismatched∙unit∙list

When a name master database file is specified at par. 3-2-4, the unit data of the database

file and the unit data actually scanned are collated. If there is a mismatch, that unit address is

displayed. Therefore, correct the address setting on the board of the displayed unit and then

re-scan. Repeat this work until a mismatched unit is not displayed.

Missing units address display field

This field displays the unit addresses and unit names whose unit data is defined by

name master database, but the relevant data could not be acquired during scanning.

Unidentified units address field

This field displays the unit address and unit model (indoor unit, outdoor unit) whose ad-

dress was received during scanning, but whose unit data is not defined by name mas-

ter database file.

OK button

When the

system list screen (see par. (-() is displayed. The application icon is also displayed at

the task tray.

If there is a unit mismatch, return to the scanning setting screen by clicking the

button and repeat collation with the scanning acquired data until there are no

mismatches. After confirming that there are not mismatches, click the

If the

scanning is displayed on the system list screen unchanged.

Cancel button

When the

button is clicked, the scanning acquisition data is stored and the

button was clicked when there is a mismatch, the unit data acquired by

button is clicked, the program returns to the scan setting screen.

button.

Table of Contents

Troubleshooting