Fujitsu AIRSTAGE UTY-ASGX Manual page 57

Note *1 Units display is [°C] or [°F]. The display format depends on the setting at the
data acquisition application. (Refer to "(-3 Environment setting")
*2 Sometimes, it may take time for the FAN status display to be updated in the
System List screen. The delay time is proportional to the number of exist-
ing indoor units and may take approximately 2 minutes for 100 indoor units
(the time does not have anything to do with the number of indoor units being
controlled). In any case, the actual control operation to the indoor units are
performed immediately after control operation from the Control screen, only
the display delays.
*3 The display format depends on the setting at the data acquisition application.
List of icon for special operation
„ „
Outdoor unit
ICON
Oil recovery operation
Maintenance mode
Emergency stop
Forced off operation
Defrost operation
Night mode operation
Capacity save operation
Indoor unit
ICON
Freeze prevention operation
Anti-freeze operation
Anti-freeze setting
Maintenance mode
Master indoor unit
Operation mode controlled by external unit
Operation mode controlled by master indoor unit
Emergency stop
Energy save operation / Economy operation
All operations invalid
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
EXPLANATION
EXPLANATION
((