Fujitsu AIRSTAGE UTY-ASGX Manual page 62

Commissioning Starts the commissioning tool. (Refer to "(-7 Commissioning tool")
Status List Switch to the "Status List screen". (Refer to "(-6 Detail screen (Status List)")
Mark List Displays the list of abbreviations.
Graph X Axis Specifies the X-axis scale of the graph.
<, << , |< Moves the display time. (Refer to "5-5-2 Schematic specification method")
Date Specifies the date of the display data.
Displays the acquisition time of the display data. (12-hour display or 2(-hour
display) (*2)
Time
For summer time, (S) is displayed.
By inputting time, data for the nearest time will be displayed.
Sets to the Intensive Data Acquisition mode which demands data from the Ser-
vice Tool to each unit. (*3)
The demand interval is set at (-12-( Demand interval setup.
IDA mode
Checked:
Unchecked:
Specifies automatic refreshing of the displayed data.
Checked:
Auto refresh
Unchecked:
*1 When unchecked (no automatic refresh) at "Auto refresh", each time the OK
Note
button is clicked, the screen can be manually refreshed to the newest status.
*2 Time is displayed according to the time format at the regional setting in the
Control panel of Windows.
*3 A data demand is sent from the Service Tool at a fixed interval and the data
returned by each unit in response to this demand is displayed on the screen.
When checked, since demands are limited to the displayed refrigerant cir-
cuits, detailed data collection is possible.
Conversely, a demand is not sent for refrigerant circuits other than the dis-
played systems. Select this when you want to monitor a specific refrigerant
circuit.
When unchecked, demands are sent to the entire system. However, instead
of the demand range becoming wide, the data density becomes thin. Set
when the system is operating normally and you want to monitor the entire
system.
60
Acquires only the refrigeration cycle of the refrigerant system
currently displayed.
Acquires the refrigeration cycle of all the refrigerant systems.
Refresh screen automatically when refrigerant circuit
status change.
Do not automatically refresh the screen.
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.