Fujitsu AIRSTAGE UTY-ASGX Manual page 47

Service tool connection method
ex) When data is acquired from a master unit
ex) When data is acquired from a slave unit
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Outdoor Unit
Master
Indoor Unit
Power ON
Master
Service Tool
UTY-ASGX
Transmission
Adaptor
Power ON
Master
Service Tool
UTY-ASGX
Transmission
Adaptor
Slave Slave
Stop operation of the Indoor
Unit of the target refrigerant
circuit.
Power ON Power ON
Slave Slave
Disconnect from the VRF
Network and connected
Service Tool and Outdoor
Unit (Master) on a 1-to-1
basis.
Slave → Master
Power ON Power ON
Master Slave
For Outdoor Unit (Slave),
connect to the Service
Tool on a 1-to-1 basis after
changing the setting (DIP
SW3; All OFF) to number
of Master and Slave 0.
((